The following sections detail what is new in this document.
The following commands are newly added to this document:
Commands that previously accepted a port range now also support the use of "all" for all ports on the same slot, or all ports on the switch. The updated port syntaxes are as follows:
The following commands are updated in this document:
|
Command |
Update |
|---|---|
| eapol re-authentication-period | Updated range to include 0. |
| ip address | Added multi-area-virtual-link parameter. |
| isis multi-area ip redistribute unicast | Added delete-tags parameter. |
| isis redistribute bgp | Added tag <1-4294967295> [-y] parameter. |
| isis redistribute ospf | Added tag <1-4294967295> [-y] parameter. |
| logical-intf isis | Added multi-area-virtual-link parameter. |
| mlt | Updated name parameter range. |
| multi-area ip redistribute unicast | Added delete-tags parameter. |
| radius server host | Updated WORD parameter range. |
| radius server host WORD<0-113> used-by cli | Added secure-ocsp parameter. |
| rate-limit | Added unknown-unicast parameter. |
| redistribute bgp (for IS-IS) | Added tag <1-4294967295> [-y] parameter. |
| redistribute isis (for BGP) | Added auto-filter-tag parameter. |
| redistribute isis (for OSPF) | Added auto-filter-tag parameter. |
| redistribute ospf (for IS-IS) | Added tag <1-4294967295> [-y] parameter. |
| show interfaces gigabitethernet rate-limit | Updated output example to include unknown unicast information. |
| show ip bgp redistributed-routes | Updated Command Output section. |
| show ip route preference | Updated output example to include IS-IS internal and IS-IS external information. |
| show isis lsdb | Updated Command Output section for new ROUTE-TAG field. |
| show radius-server | Updated output example to include secure OCSP information. |
| ssh key-exchange-method | Added new algorithm parameters. |
The following commands are removed from this document: